Add flow lines automatically: FlowBreeze will automatically add flow lines when from the last symbol if this is checked. Also, if you restart flowcharting, or if the new shape is not aligned or adjacent to the last shape, then FlowBreeze will prompt you to select the shape that you want to route a flow line from. If this setting is unchecked, no flow lines are added.

•	Use dashed lines for Alternate process symbols: Some processes have alternate paths. To indicate this, you can check this setting to make flow lines routed to or from Alternate process symbols be dashed.

Flow Direction

After you create an entry, FlowBreeze will replace it with a shape, then position the cursor to the next logical place on the sheet. the Flow direction setting determines whether the placement is below the last shape or to the right of the last shape. If you choose "Let FlowBreeze detect direction" it will wait for two consecutive shapes in any direct and place the cursor accordingly.

Arrowheads

•	Begin Point / End Point: Sets the arrowhead for the beginning and ending of the line.

•	Size: Sets the arrow head size.

Flow Line Type

•	Line Style: Determines the formatting for the line. In the Standard edition, clicking the right arrow will open the Flow Line Connector Styles window.

•	Line Type for Non-Adjacent Symbols: You can select straight, elbow, or curved. When shapes are aligned and adjacent, a straight connector is used.